Cisco WS-C3560CX-8TC-S Switch
£199.99
What do you get ?
1 x Cisco WS-C3560CX-8TC-S
1 x Power Cable
Conditions
This item is brand new opened box. This item is unused still in packaging
Out of stock
Got a question? Give us a ring.
We have IT refurbishment experts on hand to answer any questions or offer advice.
0203 874 2633 [email protected]Product Information
|
eature |
Benefits |
|
Hardware |
|
|
Small form factor; fanless design; silent operation |
The switch can be used in open workspaces and other areas that cannot tolerate equipment noise and where multiple cable runs could be difficult, expensive, and intrusive. |
|
Flexible mounting options |
The switch can be mounted on the wall, under a desk, rack, DIN rail, or practically anywhere they are needed. |
|
Cisco Multigigabit Ethernet |
With the enormous growth of 802.11ac and new wireless applications, wireless devices are driving the demand for more network bandwidth. This creates a need for a technology that supports speeds higher than 1 Gbps on all cabling infrastructure. Cisco Multigigabit Ethernet technology is a unique Cisco innovation that allows you to achieve bandwidth between speeds of 100Mbps and 10 Gbps over traditional Cat 5e cabling or above. In addition, the Multigigabit ports on the Cisco Catalyst Compact switch support PoE+, which is increasingly important for next-generation workspaces and Internet of Things (IoT) ecosystems. The Multigigabit Ethernet ports can also be used as uplinks to connect to traditional access switches such as the Cisco Catalyst 3850/4500 switches. Cisco Multigigabit technology offers significant benefits for a diverse range of speeds, cable types, and PoE power. The benefits can be grouped into three different areas: ● Multiple speeds: Cisco Multigigabit technology supports autonegotiation of multiple speeds on switch ports. The supported speeds are 100 Mbps, 1 Gbps, 2.5 Gbps, and 5 Gbps on Cat 5e cable and up to 10 Gbps over Cat 6a cabling.
● Cable type: The technology supports a wide range of cable types, including Cat 5e, Cat 6, and Cat 6a or above.
● PoE power: The technology supports PoE and PoE+ for all the supported speeds and cable types. |
|
10-Gigabit SFP+ uplinks |
Accommodates business growth and increased traffic, such as aggregate upstream gigabit traffic loads from 802.11ac Wi-Fi access points. |
|
Increased PoE+ Scale |
Provides up to 240W of PoE+ budget (twice the power per switch than previous series). |
|
Perpetual PoE |
Provides uninterrupted power to a powered-down device even when the switch is booting. This eliminates the need for a backup power source. |
|
PoE pass-through |
PoE pass-through gives the ability to power PoE end devices through drawing Cisco UPOE from the wiring closet. The Cisco Catalyst WS-C3560CX-8PT-S has eight downlink ports with two Cisco UPOE input ports that allow it to be powered by another switch. These switches do not need a power supply and receive power over the uplink from an upstream PoE or Cisco UPOE device, providing deployment flexibility and availability. These switches are ideal for wiring-constrained and space-constrained applications. |
|
Management and Operations |
|
|
Cisco SDA Extended Node |
SDA Extended Node provides Cisco DNA Center Automation and Assurance for C3560CX switches. It also extends Fabric Benefits (e.g. stretch subnet) to end points connected to the switches, allowing consistent segmentation and policy-based access. SDA Extended Node requires Cisco DNA-A license on the C3560CX switches, and a Fabric-Edge Capable switch at the upstream. |
|
Cisco Network Plug ‘n Play (PnP) |
Network Plug-n-Play (PnP) is a secure, scalable solution that accelerates network device deployments by automating the installation and configuration of Cisco IOS software. The Cisco Catalyst 3560-CX and 2960-CX switches are ‘Network-PnP Ready’ and can be used as part of the APIC-EM solution for automated switch deployments. This feature helps improve productivity, cut costs, reduce downtime, and enhance the user experience. |
|
Cisco Catalyst Smart Operations |
This comprehensive set of Cisco Catalyst technologies and Cisco IOS Software features simplify LAN deployment, configuration, and troubleshooting. ● Cisco Smart Install enables the configuration of the Cisco IOS Software image and switch without user intervention.
● Cisco Auto Smartports provides automatic configuration as end devices connect to the switch port, allowing autodetection and plug-and-play of the device onto the network. Interface templates containing configurations or policies that can be applied to ports are also supported.
● Cisco Smart Troubleshooting is an extensive array of debug diagnostic commands and system health checks, including Generic Online Diagnostics (GOLD) and Onboard Failure Logging (OBFL).
● Embedded Event Manager (EEM), supported on the Cisco Catalyst 3560-CX, provides real-time network event detection and onboard automation. You can adapt the behavior of your network devices to align with business needs. |
|
Cloud and System Management |
● Cisco Prime® Infrastructure provides comprehensive network lifecycle management with an extensive library of features that automate initial and day-to-day management. Cisco Prime integrates hardware and software platform expertise and operational experience into a powerful set of workflow-driven configuration, monitoring, troubleshooting, reporting, and administrative tools.
● Cisco Network Assistant is a PC-based, centralized network management and configuration application for small and medium-sized business (SMB) with up to 250 users. An intuitive GUI lets you easily apply common services across Cisco switches, routers, and access points.
● Cisco Active Advisor is a cloud-based service that provides essential lifecycle information about your network inventory. Available by itself or as a component of other Cisco network management applications, it helps you reduce your network’s overall risk by keeping you up-to-date on the status of your products. |
|
Operational Simplicity |
● Link Aggregation Control Protocol (LACP) for creating Ethernet channeling with devices that conform to IEEE 802.3ad. Similar to Cisco EtherChannel technology and PAgP.
● Dynamic Host Configuration Protocol (DHCP) autoconfiguration of multiple switches through a boot server.
● Multicast VLAN Registration (MVR) continuously sends multicast streams in a multicast VLAN. Isolates streams from subscriber VLANs for bandwidth and security reasons.
● Voice VLAN keeps voice traffic on a separate VLAN for easier administration and troubleshooting.
● Cisco VLAN Trunking Protocol (VTP) supports dynamic VLANs and dynamic trunk configuration across all switches.
● Remote Switch Port Analyzer (RSPAN) allows administrators to remotely monitor ports in a Layer 2 switch network from any other switch in the same network.
● For enhanced traffic management, monitoring, and analysis, the Embedded Remote Monitoring (RMON) software agent supports four RMON groups (history, statistics, alarms, and events). |
|
Security |
|
|
Cisco TrustSec® |
A suite of components that secures networks, data, and resources with policy-based access control, identity, and role-aware networking with the following elements: ● Cisco TrustSec SXP support to simplify security and policy enforcement throughout the network. For more information about Cisco TrustSec security solutions, visit cisco.com/go/TrustSec.
● Hardware on the Cisco Catalyst 3560-CX for IEEE 802.1AE MACsec for Layer 2, line-rate Ethernet data confidentiality and integrity on host-facing ports. Protects against man-in-the-middle attacks (snooping, tampering, and replay).
● Flexible authentication that supports multiple authentication mechanisms including 802.1X, MAC Authentication Bypass, and web authentication using a single, consistent configuration.
● Monitor mode that creates a user-friendly environment for 802.1X operations.
● RADIUS change of authorization and downloadable ACLs for comprehensive policy management.
● 802.1X supplicant with Network Edge Access Transport (NEAT) for extended secure access; compact switches in the conference rooms have the same level of security as switches inside a locked wiring closet. |
|
Threat Defense |
Advanced, integrated security features that provide threat defense capabilities for mitigating man-in-the-middle attacks and protecting your critical network infrastructure. ● Superior Layer 2 capabilities for mitigating MAC, IP, and ARP spoofing risks. Also protects port security, guards against DHCP snooping, and supports Dynamic ARP Inspection and IP Source Guard.
● Ipv6 first-hop security with Binding Integrity Guard, RA Guard, and DHCP Guard.
● Private VLAN provides security and isolation between switch ports.
● Multidomain Authentication allows an IP phone and a PC to authenticate on the same switch port while placing them on appropriate voice and data VLAN.
● Secure Shell (SSH), Kerberos, and Simple Network Management Protocol Version 3 (SNMPv3) that encrypt administrator traffic during Telnet and SNMP sessions to keep access credentials secure.
● Port-based Access Control List (ACL) to let the switch automatically allow or block packets based on policies for source and destination IP addresses. Rules can be set up differently on a port-by-port basis.
● Secure Boot to make sure that only signed and authorized images can load on the switch.
● Cisco AutoSecure to simplify security configurations with a single-line CLI. |
|
Power Management and Energy Efficiency |
|
|
Switch Hibernate Mode |
Innovative technology that puts the switch in an ultra-low power mode during periods of nonoperation such as nights and weekends. The switch can be configured to be in the hibernate mode using the Cisco Energy Management Suite. |
|
IEEE 802.3az or Energy-Efficient Ethernet (EEE) |
Ports dynamically sense idle periods between traffic bursts and quickly switch the interfaces into a low-power idle mode, reducing power consumption. |
|
Perpetual PoE |
Provides uninterrupted power to a powered-down device even when the switch is booting. This eliminates the need for a backup power source. |
|
PoE pass-through |
PoE pass-through gives the ability to power PoE end devices through drawing Cisco UPOE from the wiring closet. The Cisco Catalyst 3560CX-8PT-S has eight downlink ports with two Cisco UPOE input ports that allow it to be powered by another switch. These switches do not need a power supply and receive power over the uplink from an upstream PoE or Cisco UPOE device, providing deployment flexibility and availability. |
|
Power Supply |
80-Plus Silver Certified. |
|
Traffic Management and QoS |
|
Related products
-
American Dynamics OEMR XL R720XD E5-2620 2.00GHz 8GB DDR3 NO HDD
Out of Stock £149.99 Quick View -
Cisco Catalyst C9300-48P-E 48 Port PoE+
Out of Stock £1,250.00 Quick View -
Polycom RealPresence Touch Screen Interface Controller for Video Conferencing
Out of Stock £59.99 Quick View -
Extron VSC 900/900D Video Scan Converter
Out of Stock £104.99 Quick View
Explore our high quality used equipment from top brands at a fraction of the cost of buying new.
Shop now